EV Power Distribution Skids
(EVPDS)
Our mission is to lower your cost of construction and time on the jobsite for EV charging projects, all while providing consistent high-quality products for your customers. This is more than simply providing pre-fabricated power distribution systems, it's also about a means and methods approach, a simplified product offering, and a way for you and your customers to understand what's needed upfront. Selecting a system is easy, done in a few easy steps, quoted within 24 hours and delivered as a full kit to you. You provide and install the primary conduit/wire, the branch circuit conduit/wire and the installation labor.
1
CHOOSE YOUR POWER SYSTEM
2
CHOOSE YOUR OPTIONS
3
DELIVERY WITHIN 8 WEEKS
Select Your System
We offer EVPDS skids in a series of cost-effective sizes to suit virtually any application. Our skids can support up to twenty-four (24) ports at 48A or fourteen (14) ports at 80A charge output.
Our optional energy management system is available for maximizing the effectiveness of your infrastructure. Energy management components provided by The Mobility House, LLC.
75kVA 480V 48A System
112kVA 480V 48A System
112kVA 480V 80A System
112kVA 480V 48A XL System
150kVA 480V 48A System
150kVA 480V 80A System
Energy Management System
Our optional energy management system allows you to maximize your infrastructure. With energy management, more ports can be supplied from the same system - helping get more for less with little to no impact on the user experience.
ChargePilot® is designed to optimize charging operations wherever multiple electric vehicles charge at the same time. Charge your electric vehicles intelligently, reliably, and cost-effectively, today and into the future.
Charge Pilot supports a broad range of chargers using the Open Charge Point Protocol. A complete list of supported models can can be found on the Mobility House Website Here.
Standard Options
Once you've picked your system and selected your EV charge port type, now it's time to pick your options.
OP1 - Electrical Grounding Kit
Everything you need for your new skid service ground. Kit includes:
-
2 ground rods
-
2 ground rod connectors
-
30' of grounding electrode conductor (#2 AWG CU bare or #1/0 AWG CU bare, depending on skid SKU).
OP3 - Skid Mounting on Concrete
Everything you need to mount your skid on existing concrete.
Kit includes:
-
(6) - 3/8" x 3" concrete anchors
-
(6) - skid brackets
-
Hardware for anchoring the skid to brackets
OP4 - Pedestal Mounting on Ground
Everything you need to mount your charge port pedestals on the ground without pouring concrete.
Kit includes:
-
(1) - ICC certified helical ground screw (3" x 63")
-
(1) - pedestal mounting flange. Allows for up to 2 - 1.5" conduits for entry
-
Hardware for anchoring pedestal to the ground screw
(per pedestal)
Ground screw installation video here installation manual here.
OP5 - Pedestal Mounting on Concrete
Everything you need to mount your charge port pedestals onto existing concrete.
Kit includes:
-
(4) - 3/8" drop-in concrete stud anchors
(per pedestal)
OP6 - Electrical Permit Drawings
If you need electrical permit drawings for your project, our professional partners can provide fast, effective, and for lower cost. Our electrical permit drawings are designed, reviewed and sealed by our professional engineering firm partners, licensed within the project state (US states only). Drawings are for electrical permitting only and apply only to the systems and scope as purchased from Kennedy Power Systems. Standard permit drawing pricing is based on anticipating connecting the EV power distribution skid to a new or existing utility service. If feeding from existing building infrastructure (i.e. not from utility service), permit drawing pricing and lead time would be considered "custom" for that project.
Electrical only permit drawings are delivered under this option and is delivered from our 3rd party professional partners. Check local requirements for ADA, ABA, land development and/or other local processes that could impact the timing of receiving permit approval and could require construction documents other than electrical.
Become a Customer - Get a Quote!
If you know what you want
Use this form if you already know what you want. You'll receive your quote within 24 hours!
If you need help choosing
Use this form if you need help choosing product or have a customized need!
ABOUT
Kennedy Power Systems was founded to deliver electrical infrastructure systems that are designed, built and delivered to customers with far greater efficiency. This translates into lower costs, faster installation, and higher quality. Today, the company looks to serve our electrical vehicle charging infrastructure markets by designing and building systems that offer lower cost, reduced time on site, and lower barriers for EV infrastructure execution. "Can Do" is how we approach any customer need.
CONTACT
Become a Customer
For General Inquiries, use the form below. For product quotes and technical guidance, click HERE.
Main Office
